Acrylic Wall Putty

NEXEN ACRYLIC PUTTY Is a Non-flammable, with outstanding strength and possess superior handling abilities with water based filler for patching, filling, leveling uneven rough porous cement walls, plaster work and filling defective surfaces. It provides a perfect smooth finish which enhances the performance of top coat, It has excellent workability, drying and sanding properties.

SURFACE PREPARATION

All the surfaces must be dried thoroughly before putty application. Remove dust, grease, oil and other foreign material from new masonry surface. Use a bleach solution to treat the surface affected by fungus. Make the surface smooth before application of NEXEN ACRYLIC PUTTY by using sandstone or a coarse sanding paper.

APPLICATION DATA

Drying Time:
- Touch Dry: 15 minutes (Depends on temperature and humidity)
- Hard Dry: 1 hour
- Sanding: 2-3 hours

DIRECTIONS FOR USE

Stir well before use
Application can be done by Putty applicator of trowel.
Spread NEXEN ACRYLIC PUTTY to get a smooth finish. Remove any dried putty from the applicator to achieve best performance.
Clean up all equipments with water immediately after use.

SAFETY, HEALTH & ENVIRONMENTAL INFORMATION

Keep out of reach of children and away from food and drink
Do not swallow the paint. If swallowed seek medical advice immediately. lation during application and drying.
Do not breathe in vapor or sanding dust. Avoid contact with eyes and skin. When applying paint it is advisable to wear eye protection. In case of contact with eyes rinse immediately with plenty of water and seek medical advice.
Wear protective clothing and mask while applying the paint. Use soap and water to clean the splashes from skin.
Paint must always be stored in a cool and dry place.
Care must be taken during transportation. Always keep container in a secure upright position.
Do not discharge into drains or environment.
Does not contain any added Lead, Mercury, Chromium and Cadmium compounds. Chemical Safety Data Sheet available on request.